Trades
The 34 marine trades
Every company in the directory can carry one or several of these trades. Pick one to see in which ports and countries it is listed and where it is concentrated.
-
Engines
4,880 companies, 2,670 ports, 117 countries
Main and auxiliary engines are the heart of a ship, so this is the busiest trade in the directory. Work ranges from routine overhauls and spare parts to full engine rebuilds and attendance during a call.
-
Electrical
2,559 companies, 2,273 ports, 94 countries
Everything from switchboards and generators to cabling, motors and lighting. Electrical shops are often the first call for a fault that has stopped something on board.
-
Navigation and radio
2,419 companies, 2,275 ports, 100 countries
Radar, chart systems, compasses, satellite and radio gear. Many ports also have approved stations that service and certify this equipment on a fixed cycle.
-
Shipyards and drydocks
2,025 companies, 2,249 ports, 87 countries
Yards and docks that lift, repair and convert hulls. Only a few ports have a drydock big enough for a given ship, which makes this one of the trades where the nearest port can be far away.
-
Cranes and lifting gear
1,623 companies, 2,068 ports, 84 countries
Ship cranes, shore cranes, davits, wires, slings and the inspection of all of them. Lifting gear needs regular load testing, so suppliers tend to sit close to where cargo is handled.
-
Pumps
912 companies, 1,595 ports, 69 countries
Cargo, ballast, bilge, fire and cooling pumps. Suppliers repair pumps and seals, rebuild them in the workshop, or deliver replacement units.
-
Hydraulics
835 companies, 1,487 ports, 62 countries
Hydraulic power packs, cylinders, hoses and motors that move hatch covers, winches, steering rams and cranes. Hose replacement and cylinder repair are the typical jobs.
-
Valves and fittings
786 companies, 1,492 ports, 56 countries
Isolating, control and safety valves, plus the fittings around them. Overhaul and pressure testing are done ashore, which is why workshops cluster near busy anchorages.
-
Coatings
645 companies, 1,403 ports, 60 countries
Paint, blasting and hull treatment. The work is linked to drydock stays, but mobile crews also touch up tanks and decks alongside.
-
Propellers and shafting
588 companies, 1,516 ports, 74 countries
Propellers, shafts, bearings and seals. Polishing, repair and balancing happen in dock or in a workshop with a large lathe.
-
Automation
572 companies, 1,333 ports, 57 countries
Control and alarm systems, programmable controllers and monitoring panels. Specialists here are usually tied to particular maker systems.
-
Refrigeration and air conditioning
547 companies, 1,258 ports, 54 countries
Provision cold rooms, reefer plant, air conditioning and cooling circuits. Passenger ships and fishing vessels depend on it more than most.
-
Gearboxes
375 companies, 1,156 ports, 50 countries
Reduction gears and clutches between engine and propeller. Rebuilds are specialist work, and few companies do them for large ships.
-
Life-saving appliances
333 companies, 1,033 ports, 57 countries
Liferafts, lifeboats, lifejackets and launching gear. Annual servicing is mandatory, so service stations exist wherever ships call regularly.
-
Fire protection
329 companies, 1,087 ports, 66 countries
Fire detection, extinguishers, fixed fire-fighting systems and dampers. Inspection and refilling follow fixed intervals set by the flag state and class society.
-
Pipework
326 companies, 980 ports, 57 countries
Fabrication and renewal of pipe runs for fuel, water, steam and cargo. Often combined with welding and valve work.
-
Compressors
289 companies, 910 ports, 39 countries
Starting-air, working-air and refrigeration compressors. Typical jobs are valve and piston overhauls and delivery of spare kits.
-
Welding
228 companies, 952 ports, 48 countries
Steel and aluminium repairs afloat and in dock, from crack repair to renewal of plating. Approved welders and procedures matter for class work.
-
Boilers
142 companies, 685 ports, 41 countries
Auxiliary and exhaust-gas boilers and their burners and controls. Cleaning, tube repair and inspection are the usual calls.
-
Sensors and measurement
117 companies, 541 ports, 33 countries
Temperature, pressure, level and flow sensors, gauges and their calibration. Calibration certificates are the most common reason to call.
-
Machining and turning
113 companies, 550 ports, 34 countries
Workshops with lathes and mills that make or repair parts that are no longer available. Valued when a maker's spare has a long lead time.
-
Ballast water
96 companies, 468 ports, 25 countries
Treatment systems that clean ballast water before it is discharged. A comparatively young trade, driven by the rules that came into force from 2017.
-
Doors and hatches
88 companies, 493 ports, 24 countries
Hatch covers, watertight and fire doors, ramps and their seals. Seal renewal and hydraulic repair are the common jobs.
-
Deck machinery
87 companies, 400 ports, 31 countries
Winches, windlasses, capstans and mooring gear. Failures show up at the worst moment, in port, so quick local repair has value.
-
Anchors and chains
82 companies, 482 ports, 29 countries
Anchors, chain cable, shackles and chain lockers. Chain is surveyed and calibrated on a cycle, usually in dock.
-
Separators
81 companies, 401 ports, 23 countries
Centrifuges that clean fuel and lubricating oil. Service is often tied to the maker, with exchange units and overhaul kits.
-
Steering gear
81 companies, 407 ports, 27 countries
Rudders, steering gear, rudder bearings and the control systems that drive them. Steering faults can hold a ship in port, so response time counts.
-
Heat exchangers
79 companies, 371 ports, 25 countries
Coolers, heaters and condensers. Typical work is cleaning, retubing, re-gasketing and pressure testing.
-
Exhaust systems
66 companies, 413 ports, 23 countries
Exhaust pipes, silencers, scrubbers and catalytic units. Scrubber and catalyst retrofits made this a growing field.
-
Turbochargers
63 companies, 357 ports, 29 countries
Turbocharger overhaul, balancing and exchange units. Usually bound to a handful of makers, with workshops that hold their approval.
-
Filters
39 companies, 283 ports, 15 countries
Fuel, oil, water and air filter elements and housings. A high-volume spare part, often delivered as part of a larger order.
-
Burners
38 companies, 229 ports, 18 countries
Burners for boilers and incinerators, including nozzles and flame monitoring. Often served together with boiler specialists.
-
Lubricants
37 companies, 217 ports, 26 countries
Lubricating oils and greases, plus oil analysis. Suppliers deliver alongside bunker barges or by drum and tote.
-
Ventilation and fans
28 companies, 262 ports, 16 countries
Engine-room and accommodation fans, ducts and dampers. Passenger ships and tankers rely on well-kept ventilation for safety.
Status 16 November 2026. Companies are counted once per trade among the ports with a supply sheet; one company can carry several trades. Trades come from company descriptions and certificates in our data.